ETA 2824 automatic movement, 2 lignes, 1 1/2″ (25 jewels & 28,800 vibrations/hour), reliable and proven, with a custom winding rotor featuring a Côtes de Genève finish – a constant stripe pattern – for a 40-hour power reserve. Ocean blue enamel dial with guilloché wave pattern, luminescent hour markers, and red enamel with a steel case – steel hands (minutes & hours with luminescent center sections), date display at 2 o’clock, single-screw crown (at 2 o’clock) in AISI 316L steel, finished identically to the case, with a red enamel cross pattée – second crown (at 4 o’clock) dedicated to locking the bronze bezel.

Sapphire crystal, exceptional scratch resistance and optimal light transmission – AISI 316L steel case back, (diameter 44 mm & thickness 6.5 mm), machined from solid with “flange” stop and O-ring sealing gasket, finish identical to that of the case – Swiss Made marking on dial and case back engraved with the manufacturer’s autograph and serial number. Cowhide leather strap (2.5 mm thick), lined with water-repellent calfskin, hand-stitched with synthetic thread – rubberized outer surface – large AISI 316L stainless steel buckle, machined from a solid block, with pin buckle and custom MG logo, and a continuously adjustable strap buckle.

Product specifications:
Movement
ETA 2824/2 lignes 1 1/2″
25 jewels & 28,800 vibrations/hour
Customized winding rotor with Côtes de Genève finish
40-hour power reserve
Case & bezel
AISI 316L stainless steel
Cylindrical case, machined from a solid block
Engraved by milling, hand-finished (32 manual operations)
44 mm diameter with a thickness of 16.75 mm
Marine bronze bezel Ø 44 mm (machined from a solid block, engraved by milling)
Ø 44 mm – designed for use with Gloves
Dial
Ocean blue enamel dial with guilloché wave pattern
Sapphire crystal
Swiss Made marking
LumiNova and red enamel hour markers with steel case
Steel hands (minutes & hours with central Luminova section)
Date display at 2 o’clock
1st crown (at 2 o’clock) single screw AISI 316L steel, brushed finish, with red enamel cross pattée
2nd crown (at 4 o’clock) dedicated to locking the bronze bezel
Case back
AISI 316L steel
Machined from a solid block, engraved by milling, hand-finished
6.5mm thick
“Flange” stop, mounted on an O-ring and secured with Allen screws
Engraved with the manufacturer’s autograph and serial number
Strap
Calfskin leather strap (2.5mm thick),
Lined with water-repellent calfskin, hand-stitched with synthetic thread
Rubber outer surface
Large steel buckle AISI 316L machined from solid aluminum
BLACK finish
stitched with synthetic thread